AVTECH Software is pleased to announce that an update to the Room Alert 7E Firmware is available for download at AVTECH.com.
Room Alert 7E Firmware v2.5.0 includes the following:
- Major update of the Room Alert 7E operating system. AVTECH Device Discovery Utility v2.5.3 or higher *MUST* be used to install this update.
- Increased the memory available for the web interface which will result in increased responsiveness.
- Increased the size of the 'Return Address' field on the Email tab so email addresses up to 42 characters may be entered.
- Modified the 'Recipients' field on the Email tab. Multiple email addresses can now be entered in a single field and separated by a semi-colon. If an email address had previously been entered in the 'Email Recipient 2' field, it should be re-entered in the new field.
- Added support for Dynamic DNS. The name of the device should now be registered as the hostname on the DHCP and DNS servers if the network is configured to allow this.
- Improved the Alarm engine to reduce repetitive alarms. The temperature will have to return one (1) degree below the defined threshold before the alarm will be cleared. This prevents alarms from being set and cleared repetitively if the current temperature is very close to the threshold defined.
- Resolved an issue that caused the Settings page not to display after entering a valid password.
- Added a 'Help' menu option that provides links to support resources on AVTECH.com and lists the available Technical Support contact methods.
- Added the data and time the alert was generated to the body of email alerts.
- Improved the email alert functionality to provide more detailed email alert messages.
- Added an option to disable the email footer send by default in email alert messages. This is useful if email alerts are sent primarily to mobile devices with character limitations.
Thank you for choosing Room Alert 7E and feel free to contact us at Support@AVTECH.com or 888.220.6700 if you have any questions. |
AVTECH Software, Inc.