AVTECH Software is pleased to announce that an update to the Room Alert 7E Firmware is available for download at AVTECH.com.
Room Alert 7E Firmware v2.7.0 includes the following:
- Added a 'tracing' function to help diagnose issues such as email alerts not being sent. When enabled through the telnet menu, tracing information will now be output to port 87223. This tracing information can be saved to a file that can be sent to AVTECH Support by executing the command 'telnet 87223 -f C:\RA7E.tra', replacing with the IP address of the Room Alert 7E and modifying the file path if desired.
- Updated the timezones so now intermediate timezones such as Newfoundland (GMT-3:30) and India (GMT+5:30) are supported. As a result of this change, some users might have to update their timezone setting on the 'Advanced' tab after the firmware upgrade. Most should be updated automatically.
- Added a link to our 'Live Sales Support' on the About screen. This makes it easy to speak with one of our Product Specialists regarding purchasing additional sensors or devices.
- Added a new webpage display option designed specifically for mobile devices such as mobile phones and PDAs. The new URL 'http://(IP of Device)/mobile' will display a text only output of all current sensor data.
- Added a new feature that allows users to reset the high and low values for sensors by accessing the URL 'http://(IP of Device)/cmd.cgi?action=ResetHighLow'.
- Added the ability to modify the SMTP port used for email via the Telnet configuration menu.
- Added an option in the telnet interface to configure the Ethernet speed and duplex and the MTU size.
- Added an option to return sensor values in a two digit format instead of the default four digit format when queried via SNMP. This option can be configured through the Telnet configuration menu.
Thank you for choosing Room Alert 7E and feel free to contact us at Support@AVTECH.com or 888.220.6700 if you have any questions. |
AVTECH Software, Inc.