AVTECH Software is pleased to announce that an update to the TemPageR Firmware is available for download at AVTECH.com.
Note that recent updates to the AVTECH Device Discovery Utility make it easy to update multiple TemPageR devices on the network at once. We recommend upgrading to the latest version of the AVTECH Device Discovery Utility to take advantage of the new features. Click To Download AVTECH Device Discovery v2.0.0
TemPageR Firmware v2.0.1 includes the following:
- Improved the NTP feature to try to obtain the network time before logging sensor data if the time has not been set yet. It will attempt to obtain the network time up to 5 times. This is in addition to obtaining the network time when TemPageR boots and should eliminate an issue where the time is not obtained if TemPageR boots before the NTP server in the event of a power loss.
- Improved the Alarm engine to reduce repetitive alarms. The temperature will have to return one (1) degree below the defined threshold before the alarm will be cleared. This prevents alarms from being set and cleared repetitively if the current temperature is very close to the threshold defined.
- Resolved some Internet Explorer specific issues that prevented the Status page from refreshing in some cases.
- Resolved a display issue caused by Internet Explorer's incorrect caching of background images.
- Resolved an issue that caused the incorrect status icon to display for high temperatures (over 100C).
- Resolved an issue that caused the temperature to be calculated incorrectly for high temperatures (over 100C).
- Resolved an 'Page Could Not Be Displayed' issue that could occur if the 'Enter' key was pressed while modifying the refresh field.
Thank you for choosing TemPageR and feel free to contact us at Support@AVTECH.com or 888.220.6700 if you have any questions. |
AVTECH Software, Inc.